Gotowa bibliografia na temat „Engineering, General|Energy”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Engineering, General|Energy”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Engineering, General|Energy":
TAKEDA, Kunihiko. "General Engineering Ethics and Multiple Stress of Atomic Energy Engineering." Journal of the Atomic Energy Society of Japan / Atomic Energy Society of Japan 41, nr 8 (1999): 875–80. http://dx.doi.org/10.3327/jaesj.41.875.
Huang, Fu Chuan, Xing Zhong Tang i Man Rong Su. "The Development of Environment-Friendly and Energy-Saving Engineering Machinery General Oil". Applied Mechanics and Materials 331 (lipiec 2013): 321–25. http://dx.doi.org/10.4028/www.scientific.net/amm.331.321.
Bezdenezhnukh, Tatiana, Andrey Kuritsyn i Irina Gimelshtein. "Energy efficiency in civil engineering: analyzing world experience". MATEC Web of Conferences 212 (2018): 02009. http://dx.doi.org/10.1051/matecconf/201821202009.
Yu, Xiao Ping, i Xiao Feng Liao. "Study on the Multi-Target System of Building Energy Efficiency Engineering in China". Advanced Materials Research 962-965 (czerwiec 2014): 1480–84. http://dx.doi.org/10.4028/www.scientific.net/amr.962-965.1480.
Cui, Zhanfeng, i Kyongbum Lee. "Biological engineering". Current Opinion in Chemical Engineering 2, nr 1 (luty 2013): 1–2. http://dx.doi.org/10.1016/j.coche.2013.01.006.
Kiss, István Z. "Synchronization engineering". Current Opinion in Chemical Engineering 21 (wrzesień 2018): 1–9. http://dx.doi.org/10.1016/j.coche.2018.02.006.
Bashkatov, Yu L., i G. A. Shvetsov. "General energy relations for rail guns". Journal of Applied Mechanics and Technical Physics 28, nr 2 (1987): 316–20. http://dx.doi.org/10.1007/bf00918741.
Lapkin, Alexei A. "Editorial overview- Reaction engineering and Catalysis: Green chemical engineering". Current Opinion in Chemical Engineering 26 (grudzień 2019): A3. http://dx.doi.org/10.1016/j.coche.2019.12.002.
Bryukhovetsky, Kirill, i Ilya Livshitz. "An analysis of a General Data Protection Regulation impact on fuel and energy companies". Energy Safety and Energy Economy 5 (listopad 2020): 55–63. http://dx.doi.org/10.18635/2071-2219-2020-5-55-63.
Chiu, Loraine LY, i Milica Radisic. "Cardiac tissue engineering". Current Opinion in Chemical Engineering 2, nr 1 (luty 2013): 41–52. http://dx.doi.org/10.1016/j.coche.2013.01.002.
Rozprawy doktorskie na temat "Engineering, General|Energy":
Ramberg, David J. (David John). "General equilibrium impacts of new energy technologies on sectoral energy usage". Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/99536.
This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
Cataloged from student-submitted PDF version of thesis.
Includes bibliographical references (pages 185-198).
The dissertation examines conditions under which gas-to-liquids (GTL) technology penetration shifts the crude oil-natural gas price ratio. Empirical research finds long-run relationships between crude oil and natural gas prices. Some studies include time trends that steadily evolve the pricing relationship, while others show a long-run relationship that occasionally shifts significantly. A common hypothesis is that technologies that increase substitutability or complementarity between fuels are the source of the price linkage. However, empirically measuring the effects of a gradually-penetrating technology across narrow time frames is not possible due to intervening economic shocks. This thesis examines the effects of an energy conversion technology penetration on the crude oil-natural gas price ratio through its influence on sectoral energy use in the U.S. GTL must be less expensive and more efficient, and natural gas prices must be lower, than currently forecast for an effect to be measured. In the absence of a technology that explicitly allows for substitution between natural gas and petroleum-based fuels, different rates of demand growth result in a steadily-rising oil-gas price ratio. If a viable GTL technology successfully competes against petroleum-derived refined fuels, it dampens crude oil price increases and brings the oil-gas price ratio below the levels found in cases without a viable GTL technology.
by David John Ramberg.
Ph. D.
Wang, Hao. "The effect of primary air distribution on emissions from a natural gas water heater". Marquette University, 2013.
Wills, William Noah. "A General Method for Sizing Battery Energy Storage Systems for Use in Mitigating Photovoltaic Flicker". Thesis, University of Missouri - Columbia, 2019. http://pqdtopen.proquest.com/#viewpdf?dispub=13850758.
A method for sizing battery energy storage (BES) systems for use in mitigating voltage flicker caused by solar intermittency in photovoltaic generation was developed. The method creates a “design day” from existing solar data and designs the power and energy requirements for a BES system that can help a photovoltaic facility mitigate flicker caused by solar activity associated with the design day. An economic analysis of lead-acid and lithium-ion options for the BES was also developed. The method was then applied to a proposed photovoltaic project in the Midwestern United States.
Ali, Rehan. "Effect of Solar Panel Cooling on Photovoltaic Performance". Thesis, Southern Illinois University at Edwardsville, 2014. http://pqdtopen.proquest.com/#viewpdf?dispub=1560782.
One of the main problems in using the photovoltaic system is the low energy conversion efficiency of photovoltaic cells and, furthermore, during the long operational period of solar cells, their energy conversion efficiency decreases even more due to increase in operating cell temperature over a certain limit. One way of improving the efficiency of photovoltaic system is to maintain a low operating temperature by cooling it down during its operation period. This study compares the effects of cooling on the performance of photovoltaic system. Experiments are performed on the solar panel inclined at fixed 45° angle without active cooling initially to have a set of reference performance parameters for comparison. Afterwards, cooling of the solar panel is carried out using air and water, separately, as the cooling fluids. I-V tests and temperature tests, for all the cases, are performed for comparative analysis. The energy balance calculations showed that the experimental results are in conformity with the theoretical results. The results further showed that the cooling of photovoltaic system using water over the front surface enhances the performance even more as compared to air cooling of solar panel.
DeLuca, Christopher. "Numerical Modeling and Optimization of Mechanically Active Electrochemical Systems". Thesis, University of Colorado at Boulder, 2013. http://pqdtopen.proquest.com/#viewpdf?dispub=3592275.
This work is primarily motivated by the hope that Silicon (Si) can be utilized in Lithium (Li) ion batteries to enable an order of magnitude capacity increase if Li-Si systems can be better understood. In order to create a valuable tool that could be used to study a wide range of problem, pertinent physical models were implemented in an extended finite element method (XFEM) framework written in c++. One of the major contribution of this work goes to the battery modeling community, by generalizing several existing electrochemical-mechanical models which use a small deformation approximations so they can accommodate finite deformation. A general theory which can be used to guide the development of new finite element models is presented in detail. This work also contributes new finite element modeling tools with novel predictive capabilities to the battery modeling community, which will hopefully facilitate the design and optimization of next generation battery micro-structures. Studies within demonstrate that small deformation approximation models can produce incorrect predictions about the behavior of Li-Si systems, supporting the case for using finite deformation models. The developed tools are used to demonstrate that arbitrary geometries can easily be simulated on a the same fixed grid, facilitating automated geometry studies including parameter sweeping and topology optimization.
Attalah, Said. "Energy evaluation of the High Velocity Algae Raceway Integrated Design (ARID-HV)". Thesis, The University of Arizona, 2013. http://pqdtopen.proquest.com/#viewpdf?dispub=1536266.
The original ARID (Algae Raceway Integrated Design) raceway was an effective method to increase temperature toward the optimal growth range. However, the energy input was high and flow mixing was poor. Thus, the ARID-HV (High Velocity Algae Raceway Integrated Design) raceway was developed to reduce energy input requirements and improve flow mixing. This was accomplished by improving pumping efficiency and using a serpentine flow pattern in which the water flows through channels instead of over barriers. A prototype ARID-HV system was installed in Tucson, Arizona, and the constructability, reliability of components, drainage of channels, and flow and energy requirements of the ARID-HV raceway were evaluated. Each of the electrical energy inputs to the raceway (air sparger, air tube blower, canal lift pump, and channel recirculation pump) was quantified, some by direct measurement and others by simulation. An algae growth model was used to determine the algae production rate vs. flow depth and time of year. Then the electrical energy requirement of the most effective flow depth was calculated. Channel hydraulics was evaluated with Manning's equation and the corner head loss equation. In this way, the maximum length of channels for several raceway slopes and mixing velocities were determined. Algae production in the ARID-HV raceway was simulated with a temperature and light growth model. An energy efficient design for the ARID-HV raceway was developed.
Basgall, Lance Edgar. "Thermal energy storage design for emergency cooling". Thesis, Kansas State University, 2010. http://hdl.handle.net/2097/4637.
Department of Mechanical and Nuclear Engineering
Donald L. Fenton
Emergency cooling systems are applied to any application where the loss of cooling results in damage to the product, loss of data, or equipment failure. Facilities using chilled water for cooling that experience an electrical power outage, even a small one, would cause the chiller to shut down for 20 minutes or more. If emergency cooling is not available, temperatures would continue to increase to dangerous levels, potentially damaging the facility. Examples of facilities that could be protected by having emergency cooling systems are data centers, hospitals, banks, control rooms, laboratories, clean rooms, and emergency shelters among others. This project addresses the current lack of information and methods needed to correctly design emergency cooling systems. Three application uses were investigated for the possible benefits of having emergency cooling systems. The software TRNSYS was used to simulate five typical emergency cooling systems for each of the three applications. The characteristics and differences of the systems developed from the simulations were then analyzed and documented. The five systems simulated include a pressurized chilled water tank (parallel), atmospheric chilled water tank (parallel and series), low temperature chilled water tank (parallel), and ice storage tank (series). Simulations showed that low temperature chilled water tanks were less stratified than regular chilled water tanks by approximately 10%. Simulations also showed that the differences between atmospheric and pressurized tanks were negligible. Each tank discharged energy in the same manner and managed to replenish itself in the same amount of time. Examination of the different system configurations showed that tanks in series with the thermal load have issues with recharging due to its inability to isolate itself from the thermal load. It was also observed that while low temperature chilled water and ice storage tanks had the potential of reducing the storage tank volume, the amount of time ragged cooling will last is decreased by at least a factor of two. The examination of the five systems produced the desired design methodologies needed to address the lack of information on emergency cooling systems. With the reported information designers can effectively engineer systems to meet their needs.
Soner, Ilker. "Utilization Of Fluidized Bed Combustion Ashes As Raw Material In The Production Of A Special Cement". Master's thesis, METU, 2009. http://etd.lib.metu.edu.tr/upload/12610651/index.pdf.
C for various holding times. The results of chemical and mineralogical analysis as well as microscopic examination reveal that FBC ashes have the potential to be used in the raw meal due to the presence of characteristic mineral phases of this type of cements, i.e. yeelimite, larnite, ferrite and anhydrite, in the sample obtained at optimum sintering temperature of 1250 °
C for 60 min.
Dogruoz, Cihan. "Effect Of Pick Blunting On Cutting Performance For Weak Moderate Rocks". Phd thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/12612614/index.pdf.
as the limiting specific energy above which poor cutting performance occurs. Nine prediction models have been developed by statistical analysis to estimate the laboratory cutting specific energy from various rock properties and wear rates.
Kusyilmaz, Ahmet. "Finite Element Study On Local Buckling And Energy Dissipation Of Seismic Bracing". Master's thesis, METU, 2008. http://etd.lib.metu.edu.tr/upload/12609662/index.pdf.
however, it is now possible to conduct finite element simulation of brace components using personal computers. A finite element study has been undertaken to evaluate the aforementioned limits for pin-ended pipe section steel braces. Fifty four tubular pipe brace models possessing different diameter-to-thickness ratios varying from 5 to 30 and slenderness ratios varying from 40 to 200 were analyzed. The effect of cyclic hardening modulus on the response of braces was explored. In all analysis, the models were subjected to reversed cyclic displacements up to ten times the yield displacement. Local buckling was traced during the loading history using a criterion based on local strains. Results are presented in terms of the ductility level attained by the member at the onset of local buckling. It is shown that local buckling of the section is influenced by the diameter-to-thickness and the slenderness ratios of the member. Moreover, the amount of hardening modulus was found to affect the local buckling response significantly. The need to include this material property into seismic provisions is demonstrated. Finally, the hysteretic energy dissipated by the member was quantified for each displacement excursion.
Książki na temat "Engineering, General|Energy":
Siddalingappa, B. Engineering physics. Mumbai [India]: Himalaya Pub. House, 2010.
Curley, Robert. Renewable and alternative energy. New York: Britannica Educational Pub., in association with Rosen Educational Services, 2012.
Al-Shemmeri, Tarik. Energy audits: A workbook for energy management in buildings. Chichester, West Sussex, UK: Wiley-Blackwell, 2011.
Krarti, Moncef. Weatherization and energy efficiency improvement for existing homes: An engineering approach. Boca Raton: CRC Press, 2012.
Hau, Erich. Wind Turbines: Fundamentals, Technologies, Application, Economics. Wyd. 3. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013.
Capehart, B. L. Guide to energy management. Wyd. 2. Lilburn, GA: Fairmont Press, 1997.
Capehart, B. L. Guide to energy management. Wyd. 5. Lilburn, GA: Fairmont Press, 2005.
Capehart, B. L. Guide to energy management. Wyd. 5. Lilburn, GA: Fairmont Press, 2007.
Capehart, B. L. Guide to energy management. Wyd. 6. Lilburn, GA: The Fairmont Press, 2008.
Capehart, B. L. Guide to energy management. Wyd. 4. Lilburn, GA: Fairmont Press, 2003.
Części książek na temat "Engineering, General|Energy":
Tzafestas, Spyros G. "Energy I: General Issues". W Intelligent Systems, Control and Automation: Science and Engineering, 39–72. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-66999-1_2.
Gitelman, L. D., M. V. Kozhevnikov i T. B. Gavrilova. "General Concept for Preventing Energy Crises". W Innovation and Discovery in Russian Science and Engineering, 47–53. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-75702-5_6.
Xu, Lei, Yumei Zhuo i Yuan Yuan. "A Computable General Equilibrium Model for the Finance Policy Simulation and Optimal Selection of Renewable Energy". W Proceedings of the Twelfth International Conference on Management Science and Engineering Management, 355–66. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-93351-1_29.
Martinez, Jabier, Alejandra Ruiz, Javier Puelles, Ibon Arechalde i Yuliya Miadzvetskaya. "Smart Grid Challenges Through the Lens of the European General Data Protection Regulation". W Lecture Notes in Information Systems and Organisation, 113–30. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-49644-9_7.
Trump, Benjamin D., Marie-Valentine Florin, Edward Perkins i Igor Linkov. "Biosecurity for Synthetic Biology and Emerging Biotechnologies: Critical Challenges for Governance". W NATO Science for Peace and Security Series C: Environmental Security, 1–12. Dordrecht: Springer Netherlands, 2021. http://dx.doi.org/10.1007/978-94-024-2086-9_1.
Schulte, Fiona, Hermann Kloberdanz i Eckhard Kirchner. "Modelling of Resilient Coping Strategies within the Framework of the Resilience Design Methodology for Load-Carrying Systems in Mechanical Engineering". W Lecture Notes in Mechanical Engineering, 59–69. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-77256-7_6.
Boicea, Valentin A. "General Aspects Related to the Field of Big Data and Big Data in Power Engineering". W Energy Management, 5–35. Boca Raton: CRC Press, 2021. http://dx.doi.org/10.1201/9781003147213-2-2.
Trump, Benjamin D., Stephanie Galaitsi, Miriam Pollock, Kaitlin M. Volk i Igor Linkov. "Promoting Effective Biosecurity Governance: Using Tripwires to Anticipate and Ameliorate Potentially Harmful Development Trends". W NATO Science for Peace and Security Series C: Environmental Security, 209–25. Dordrecht: Springer Netherlands, 2021. http://dx.doi.org/10.1007/978-94-024-2086-9_14.
Lai, Wallace Wai-Lok. "Underground Utilities Imaging and Diagnosis". W Urban Informatics, 415–38. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-15-8983-6_24.
"Energy Definition and General Theory of the Efficient Subsoil Model". W Developments in Geotechnical Engineering, 31–67. Elsevier, 1989. http://dx.doi.org/10.1016/b978-0-444-98859-1.50006-7.
Streszczenia konferencji na temat "Engineering, General|Energy":
Morched, Atef S. "Publication policies in engineering periodicals". W Energy Society General Meeting. IEEE, 2008. http://dx.doi.org/10.1109/pes.2008.4596832.
Fehr, R. E. "A model curriculum for power engineering". W Energy Society General Meeting. IEEE, 2008. http://dx.doi.org/10.1109/pes.2008.4596572.
Crow, M. L. "Power engineering education: Challenges and opportunities". W Energy Society General Meeting. IEEE, 2008. http://dx.doi.org/10.1109/pes.2008.4596593.
Kulkarni, A. M., B. G. Fernandes, S. V. Kulkarni i S. A. Khaparde. "Power engineering laboratories at IIT Bombay". W Energy Society General Meeting. IEEE, 2008. http://dx.doi.org/10.1109/pes.2008.4596151.
Rosehart, W. D., i J. A. Aguado. "Canadian and Spanish power and electrical engineering curriculums". W Energy Society General Meeting. IEEE, 2008. http://dx.doi.org/10.1109/pes.2008.4596678.
Karady, George G. "Roll of laboratory education in electrical power engineering education". W Energy Society General Meeting. IEEE, 2008. http://dx.doi.org/10.1109/pes.2008.4596141.
Jewell, Ward T. "The importance of laboratory experience in power engineering education". W Energy Society General Meeting. IEEE, 2008. http://dx.doi.org/10.1109/pes.2008.4596491.
Wenxin Liu, Li Liu i David A. Cartes. "Particle Swarm Optimization as a general design tool in power engineering". W Energy Society General Meeting. IEEE, 2008. http://dx.doi.org/10.1109/pes.2008.4596850.
Reed, G. F., i W. E. Stanchina. "Smart grid education models for modern electric power system engineering curriculum". W Energy Society General Meeting. IEEE, 2010. http://dx.doi.org/10.1109/pes.2010.5589617.
Montoya, A. H. "The future of the electric utility industry: Opportunities for power engineering education". W Energy Society General Meeting. IEEE, 2008. http://dx.doi.org/10.1109/pes.2008.4596792.
Raporty organizacyjne na temat "Engineering, General|Energy":
Some complex approaches to training micro-cycles formation among cadetsweightlifters taking into account biotypes. Ilyas N. Ibragimov, Zinaida M. Kuznetsova, Ilsiyar Sh. Mutaeva, marzec 2021. http://dx.doi.org/10.14526/2070-4798-2021-16-1-39-46.